Malossi PHBH 30 BD Carburettor Kit - 125cc/150cc

Malossi PHBH 30 BD Carburettor Kit - 125cc/150cc
 Malossi PHBH 30 BD Carburettor Kit - 125cc/150ccMalossi PHBH 30 BD Carburettor Kit - 125cc/150cc 


Malossi Dellorto PHBH 30mm carburettor kit complete with manifold, air bellow, throttle and choke cable. Everything you need to convert from a standard Dellorto SI carburettor to a Dellorto PHBH carburettor.

Our Price:  £164.99(£137.49 Exc. VAT)


Sorry No Stock  

Sorry No Stock

Manifold Securing Nut/Bolt Torque : 16-20Nm (12-15 lb/ft)
Special Notes
Autolube must be removed to fit this manifold.
The manifold is fitted using the original carburettor fasteners.
The engine casing inlet should be matched to the manifold.
The manifold can be fitted to non autolube engines, however the part of the manifold designed to blank off the autolube will overhang the gasket face.
The carburettor is supplied with atomiser, needle and jets fitted. They may not be correct for the engine the carburettor kit is being fitted to and may need to be changed.
Main Jet : 130
Idle Jet : 55
Atomiser : AV260
Needle : X2
Choke Jet : 70
Throttle Slide : 50
Float Needle Valve : 225
Float Needle : 4.5mm
Vespa P125X 1977-1982*
Vespa PX125E 1981-1984
Vespa PX125EFL 1983-1984
Vespa PX125EFL 1984-1985
Vespa PX125EFL 1985-1987
Vespa PX125EFL 1987-1998
Vespa PX125 Disc 1998-1999
Vespa PX125 (Euro 1) 1999-2001
Vespa PX125 MY01 2001-2004
Vespa PX125 (Euro 2) 2004-2007
Vespa PX125 (Euro 3) 2011
Vespa PX125 (Euro 3) 2011-2016
Vespa T5 1985-1992*
Vespa T5 Classic 1992-1999
Vespa T5 Millenium 1999
Vespa P150X 1978-1981*
Vespa PX150E 1981-1985
Vespa PX150EFL 1983-1984
Vespa PX150EFL 1984-1985
Vespa PX150EFL 1985-1987
Vespa PX150EFL 1987-1998
Vespa PX150 Disc 1998-1999
Vespa PX150 (Euro 1) 1999-2001
Vespa PX150 MY01 2001-2004
Vespa PX150 (Euro 2) 2004-2007
Vespa PX150 (Euro 3) 2011
Vespa PX150 (Euro 3) 2011-2016
* The manifold may require slight modification to sit flat on the engine casing gasket face of non autolube models.