Recently Viewed

Malossi PHBH Inlet Manifold

Malossi PHBH Inlet Manifold
 Malossi PHBH Inlet ManifoldMalossi PHBH Inlet Manifold 

Malossi inlet manifold for fitting Dellorto PHBH series carburettors to autolube engines. The manifold is designed to blank off the hole left in the casing after the autolube system has been removed.

Our Price:  £44.59(Inc. 20% VAT)Quantity:

Availability:  

In Stock  

In Stock

Manifold Securing Nut/Bolt Torque : 16-20Nm (12-15 lb/ft)
 
 
Special Notes
 
Autolube must be removed to fit this manifold.
 
The manifold is fitted using the original carburettor fasteners.
 
The engine casing inlet should be matched to the manifold.
 
The manifold can be fitted to non autolube engines, however the part of the manifold designed to blank off the autolube will overhang the casing and the manifold base may need slightly modifying to sit on the engine casing gasket face.
Vespa P125X 1977-1982*
Vespa PX125E 1981-1984
Vespa PX125EFL 1983-1984
Vespa PX125EFL 1984-1985
Vespa PX125EFL 1985-1987
Vespa PX125EFL 1987-1998
Vespa PX125 Disc 1998-1999
Vespa PX125 (Euro 1) 1999-2001
Vespa PX125 MY01 2001-2004
Vespa PX125 (Euro 2) 2004-2007
Vespa PX125 (Euro 3) 2011
Vespa PX125 (Euro 3) 2011-2016
 
Vespa T5 1985-1992
Vespa T5 Classic 1992-1999
Vespa T5 Millenium 1999
 
Vespa P150X 1978-1981*
Vespa PX150E 1981-1985
Vespa PX150EFL 1983-1984
Vespa PX150EFL 1984-1985
Vespa PX150EFL 1985-1987
Vespa PX150EFL 1987-1998
Vespa PX150 Disc 1998-1999
Vespa PX150 (Euro 1) 1999-2001
Vespa PX150 MY01 2001-2004
Vespa PX150 (Euro 2) 2004-2007
Vespa PX150 (Euro 3) 2011
Vespa PX150 (Euro 3) 2011-2016
 
Vespa P200E 1977-1982*
Vespa PX200E 1982-1986
Vespa PX200EFL 1983-1984
Vespa PX200EFL 1984-1985
Vespa PX200EFL 1985-1987
Vespa PX200EFL 1987-1994
Vespa PX200EFL Elestart 1994-1998
Vespa PX200 Disc 1998-2001
Vespa PX200 MY01 2001-2003
 
 
* The manifold may require slight modification to sit flat on the engine casing gasket face of non autolube models.